Original JLR DoIP VCI Jaguar Land Rover diagnostic tool supports both USB and WiFi connection. Here’s the guide to connect JLR VCI via USB.
PLC and Motion control programming based on CoDeSys V3 with object-oriented language extensions,Intelligent, wizard-supported operation,Comprehensive software libraries acc. To IEC 61131-3 and PLCopen,Standardized interfaces such as FDT/DTM, connection of version control systems and automation interface,Detailed diagnoses. This version of GM software (v8.5.33.53) is applicable to the original GM MDI and the new MDI 2. Click on the.exe file and follow prompts to download. Bosch Security and related drivers. Network / IP / NVR / Surveillance / Baby Camera Bosch Security. Jun 16th 2016, 18:41 GMT.
To setup USB connection, you need to download Bosch driver for VCI first:
Open Bosch_Driver folder
Open MTS6533_Setup
Install Bosch VCI Software (JLR)
Press Next
Press Next
Press Install
Finish installing Bosch VCI software
USB Configuration in progress. Don’t disconnect JLR VCI from PC until a message indicates that the configuration process has completed.
Open Device Manager to check the Bosch JLR DoIP VCI adapter is well connected
Open VCI Manager on desktop to make sure the Manager detect JLR VCI which indicates interface is well connected
Right click JLR SDD software on desktop->Find File location C:/Program Files/JLR/SDD/Runtime
Open the GatewayManager with Notepad
Find “Device5 = JLR-DOIP” and change value to “, Device5 = JLR-DOIP”
Find Go to C:/Program Files/JLR/IDS/Runtime
Open the GatewayManager with Notepad
Find “Device5 = JLR-DOIP” and change value to “, Device5 = JLR-DOIP”
Setup completed.
Now you can run JLR SDD and Pathfinder software
Bosch Impact Driver Bits
See also: How to connect JLR DoIP VCI via WiFi
Download Bosch Driver Tool
Who Viewed This Article Also Views: